Operating your sound system

1. Press the On / Standby button to switch on your sound system. The

display will show "TUNING" for a few seconds.

 

When fi rst switched on, the sound system will be in DAB mode. After

 

each use the sound system will remember the mode used and then

1

switch on in that mode the next time that it is used.

2.If the sound system has been used before, the last used station will be selected.

3.If this is the fi rst time that the sound system has been used, then the fi rst station in the list of stations found during scanning will be played. The display will show the station name on the display.

4.If no signals are found then "OFF AIR" will be displayed and it may be necessary to relocate your sound system to a position giving better reception.Youshouldthencarryoutascantofindstationsasdescribed on page 9.

Your sound system has an indicator on the display to indicate the strength of the DAB radio signal being received.

5