Using the sound system for the first time
1.Place your sound system on a fl at surface.
2.Fully extend the telescopic aerial. The aerial should be fully extended and positioned vertically for optimum reception.
3.Plug the cable from the mains adaptor into the DC input socket on the rear of your sound system (marked 'DC') ensuring that the plug is pushed fully into the socket. Plug the mains adaptor into a wall socket and switch on the socket. The display will show "ROBERTS" for a few seconds and then the display will then show "SCANNING". During this time the sound system is scanning to fi nd out which DAB radio stations are available. While scanning markers will show progress of the scan together with a count of stations found. After a short time the current time and day will appear on the display.
4.If no stations are found, "NO CLOCK" will be displayed. It may be necessary to relocate your sound system to a position giving better reception.Youshouldthencarryoutascantofindstationsasdescribed on page 9.
IMPORTANT: The mains adaptor is used as the means of connecting the sound system to the mains supply. The mains socket used for the sound system must remain accessible during normal use. In order to disconnect the sound system from the mains, the mains adaptor should be removed from the mains socket outlet completely.
Characters appearing on the LCD display indicate that the sound system is connected to and powered from the mains supply.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 | 4 |