This happens when f rom your desktop, St art Setup Contr ol Panel S ystem
Hardwa re Device Man ager Monitor is selected, the current "Plug-and-play monitor"
is removed and new hardware is searched for but the system couldn't find any "Plug-and-
play monitor".
Please visit our homepage to see the Troubleshooting section.
An error occurs when replacing the monitor with a ne w one when the syst em power is off
but the system has not been restar ted.
Please restart the system each time the monitor is replaced before using MagicTun e™.
An error occurs when the video card dr iver is not installed properly.
This happens when the current video card list is not displayed normally. You can check
this via Start Setup System Hardwa re De vice Manager Display Ada pter.
Visit the video card maker's homepage and download and install the latest driver.
For more information about the video card, contact the card manufacture r.
To ensure normal operation, please restart your system .
An error occurs when the system is not restarted after installing MagicTune™.
(This is for Win98SE and WinMe only.)
Restart the system before use.
For the best performance of MagicTune™, adjust to the optimal resolution.
Refer to the User G uide for the opt imal resolution.
If you do not adjust t o the optimal r esolution and perform Color Calibration, the m onitor
cannot be adjusted to the optimal condition.
Refer to the manual for the optimal resol ution.
This video card does not support M agicTune™.
Please install a new video card driver.
An error occurs when the video card dr iver is not installed properly.
This happens when the current video card list is not displayed normally. You can check
this from Start Setup System Har dware Device Manager Disp lay A dapte r.
Visit the video card manufacturer's homepage and download and ins tall the latest
driver.
For more information about the video card, contact the card manufacture r.
As the Highlight program uses the communication lines,
please exit the Highlight prog ram before you can access MagicTune™.
Some of Samsung C DT monitors suppor t the Highlight feature.
When using both the H ighlight feature and MagicTune™ simultaneous ly, conflicts occur,
which cause errors.
Make sure to turn OF F Highlight before us ing MagicTune™ .
Troubleshooting
zMagicTune™ may no t work in case m onitor is replaced or driver of graphic ca rd is updated while
MagicTune™ is operating. If so, please restart the system.
Symptom Check List Solutions
Check when
MagicTune™ does not
function properly.
MagicTune™ feature is
found only on PC (VGA)
with Window OS that
* To check whether your PC is available for
MagicTune™ feature, follow the
steps below (When Windows™ is XP);