![](/images/new-backgrounds/1272946/27294685x1.webp)
Signal connectors
15pin
Dimensions (WxHxD)/ Weight
466 x 406 x 217 mm / 18.3 x 16.0 x 8.5 inch / 6.2 kg / 13.7 lbs (With Stand) 466 x 371 x 66 mm /18.3 x 14.6 x 2.6 inch (Without Stand)
VESA Mounting Interface
100 mm X 100 mm (for use with Specialty(Arm) Mounting hardware.)
Environmental considerations |
|
Operating | Temperature: 50°F ~ 104°F(10°C ~ 40°C) |
| Humidity: 10% to 80%, |
Storage | Temperature: |
| Humidity: 5% to 95%, |
Plug and Play Capability |
|
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm(one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness.
zFor example, the number of TFT LCD sub pixels contained in this product are 3,888,000.
Note: Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas.
(Class B equipment emits less electromagnetic waves than Class A equipment.)
PowerSaver
This monitor has a
State | Normal Operation | Power saving mode | Power off | |
Power Indicator | Green | Green, Blinking | Black | |
Power Consumption | Analog/Digital | Analog/Digital | Less than 2 W | |
Less than 2 W | ||||
Less than 55 W | (110Vac) | |||
| ||||
|
|
|
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.