Cleaning and maintenance

Before you clean the air purifier, you must stop the operation and unplug the air purifier.

Cleaning the exterior

Saturate the provided cleaning only towel with warm water and wring the towel tightly. Then wipe the air purifier with the towel.

Especially, dust might pile up around the air inlet of the air purifier, so please clean the area frequently.

 

• Do not clean the digital display and control panel with alkaline

 

Air inlet

 

 

CAUTION

detergent.

 

 

 

 

 

• Do not use acid, acetone or organic solvent(Kerosene, Thinner, etc.) to

clean the surface and do not attach any stickers. They may damage the surface of the appliance.

•When wiping the surface of the air purifier with coarse cloth or rag, fine scratch might be on the surface of the air purifier. Therefore, you should use a soft cloth.

Cleaning sensor section

Sensor section is composed of the dust sensor and odor sensor. The dust sensor detects the contamination level of fine dust or big dust particle and the odor sensor detects the contamination level of general odors of home such as food and cigarette smells. The lens of the dust sensor should be cleaned periodically to maintain its performance efficiency.

1 . Open the side sensor cover.

Open the side sensor cover using a mini screwdriver or an object with flat or thin end.

2 . Clean the dust sensor lens with a cotton bud and remove the dust around the odor sensor.

• Except for water, do not clean the sensor section with volatile matter

CAUTION

such as alcohol and benzene.

 

•When removing dust from the dust sensor, do not wipe off the dust sensor grid.

•When foreign matter(dust) remains around the dust sensor lens, the contamination level status might not be changed from contamination status. In that case, clean the sensor again.

3 . Close the side sensor.

Put the side sensor cover into the left side groove and push it in the arrow direction.

 

• You can conveniently clean the sensor section with a vacuum cleaner

NOTE

with the side sensor closed.

•Clean the sensor section every six months. However, the cleaning period can vary according to the surrounding environment and hours of usage, so the period should be shorter in a dusty environment.

Dust sensor

Odor sensor

Dust sensor lens

Odor sensor net

Side sensor section

Side sensor section

Vacuum cleaner

16

AC-M50ANSA Series_IB_EN_33977A(4).indd 16

2013-07-08 오후 6:07:06