Replacing Deodorization filter section
Deodorization + DNA filter is a high performance filter that removes not only the harmful smells generated by furniture, wall paper, adhesives but also general odor.
When replacing the Deodorization filter, follow the procedure below.1 . Pull out the Deodorization filter after opening the filter box.2 . Widen each side of the filter frame with hands and pull out the deodorization + DNA filter from filter frame.
3 . Put the new deodorization + DNA filter into the filter frame.4 . After closing the filter box door, plug in the air purifier.• Clean the
NOTE | display on the control panel is lit up. |
| |
| • After cleaning the |
| again. (The dry time of the filter might be different depending on the |
| seasons.) |
| • After cleaning the |
| panel for more than 2 seconds. The filter cleaning alarm display on the |
| control panel will be off with the‘beep’ sound. When the filter needs to |
| be cleaned, the filter cleaning alarm display will be lit up again. |
| • Sometimes, |
| depending on the surrounding environment. However, you should |
| press [Reset] button for more than 2seconds whenever you finish |
| cleaning the filter. |
| • Lift up the |
| pull it out in the arrow direction(2). |
| • Changing the deodorization + DNA filter once a year is recommended. |
| However, the filter replacement period may be different depending on |
| the indoor air contamination level and hours of usage. Therefore, when |
| the strange smell is generated from the filter, purchase a new filter at a |
| service center or a retail store and replace it. |
Deodorization filter section
Deodorization filter
➀
➁
17