3-12
Catalyst 3750, 3560, 3550, 2975, 2970, and 2960 Switch System Message Guide
OL-8551-04
Chapter 3 Message and Recovery Proced ures
CFGMGR Messages
Explanation The switch type of the specified switch does not match the provisioned configuration
for its switch number; therefore, the default configuration is applied to this switch. [dec] is the stack
member number.
Recommended Action No action is required.
Error Message CFGMGR-6-APPLYING_RUNNING_CFG: as new master.
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation A new stack master is applying the backed-up running configuration.
Recommended Action No action is required.
Error Message CFGMGR-6-SPURIOUS_MEMBER_ADD: CFG MGR Recvd Spurious New Member
Notification: [int].
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation The configuration manager received a notification about adding a stack member switch
that already exists in the stack. [int] is the switch number.
Recommended Action If this message recurs, copy i t exactly as it appears on the console or in the
system log. Research and attempt to resolve the error by using the Output Interpreter. Use the Bug
Toolkit to look for similar reported problems. If you still require assistance, open a case with the
TAC, or contact your Cisco technical support representative, and provide the representative with the
gathered info rmation. For more information about these online tools and about contacting Cisco, see the
“Error Message Traceback Reports” section on page 2-7.
Error Message CFGMGR-6-UNABLE_TO_NVGEN_BUSY_RUNNING_CFG: config file busy,
retrying...
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation The stack master is temporarily unable to generate the stack running configuration
because another process is generating the configuration file.
Recommended Action No action is required. The action will be tried again.