3-67
Catalyst 3750, 3560, 3550, 2975, 2970, and 2960 Switch System Message Guide
OL-8551-04
Chapter 3 Message and Recovery Procedures
ILPOWER Messages
Error Message ILPOWER-5-IEEE-DISCONNECT: Interface [chars]: PD removed.
Note This message applies only to Catalyst 3750 and 3560 switches.
Explanation The powered device is no longer connected to the switch or that the connected powered
device is being powered by an external AC power source. The switch is no longer providing power
to the port. [chars] is the interface.
Recommended Action No action is required.
Error Message ILPOWER-5-ILPOWER_POWER_CDP_SHUT: Interface [chars]: inline power shut
Note This message applies only to Catalyst 3750, 3560, and 3550 switches.
Explanation Inline power is shut down because CDP consumption power on this Power over Ethernet
(PoE) port is greater than the allocation power, the hardware interface limit, the user-configured
maximum power, or the available power on this switch. [chars] is the interface.
Recommended Action No action is required.
Error Message ILPOWER-5-ILPOWER_POWER_DENY: Interface [chars]: inline power denied.
Note This message applies only to Catalyst 3750 and 3560 switches.
Explanation There is not enough power remaining in the switch to s upply to the PoE port. [chars] is
the interface.
Recommended Action Connect the powered device to an external AC power source.
Error Message ILPOWER-5-ILPOWER_POWER_DENY:Interface [chars]:inline power denied
Note This message applies only to Catalyst 3550-24PWR switches.
Explanation The PoE request was denied because the switch does not have enough power left to
support the request. [chars] is the interface number.
Recommended Action No action is required.