3-146
Catalyst 3750, 3560, 3550, 2975, 2970, and 2960 Switch System Message Guide
OL-8551-04
Chapter 3 Message and Recovery Proced ures
TCAMMGR Messages
Error Message TCAMMGR-3-HANDLE_ERROR: cam handle [hex] is invalid.
Note This message applies only to Catalyst 3750, 3560, 2975, 2970, and 296 0 switches.
Explanation The CAM handle used by the caller is not valid. [hex] is the handle value.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with th e gathered
information. For more information about these online tools and about contacting Cisco, see the “Error
Message Traceback Reports” section on page 2-7.
Error Message TCAMMGR-3-INDEX_ERROR: cam value/mask index [dec] is invalid.
Note This message applies only to Catalyst 3750, 3560, 2975, 2970, and 296 0 switches.
Explanation The CAM index used by the caller is not valid. [dec] is the index value.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with th e gathered
information. For more information about these online tools and about contacting Cisco, see the “Error
Message Traceback Reports” section on page 2-7.
Error Message TCAMMGR-3-MOVE_ERROR: cam entry move from index [int] to index [int]
failed.
Note This message applies only to Catalyst 3750, 3560, 2975, 2970, and 296 0 switches.
Explanation Moving a CAM entry from one index to another failed . [int] is the index value.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with th e gathered
information. For more information about these online tools and about contacting Cisco, see the “Error
Message Traceback Reports” section on page 2-7.
Error Message TCAMMGR-3-REGION_ERROR: cam region [dec] is invalid.
Note This message applies only to Catalyst 3750, 3560, 2975, 2970, and 296 0 switches.