3-128
Catalyst 3750, 3560, 3550, 2975, 2970, and 2960 Switch System Message Guide
OL-8551-04
Chapter 3 Message and Recovery Proced ures
STACKMGR Messages
Explanation This switch could not get the device record for some or all other switches in the stack.
Recommended Action Find out more about the error by u sing the show tech-support privileged EXEC
command and by copying the error message exactly as it appears on the console or system log and
entering it in the Output Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For
more information about these online tools and about contacting Cisco, see the “Error Message
Traceback Reports” section on page 2-7.
Error Message STACKMGR-3-MSG_FAIL: Failed to retrieve stack message from port-asic
[dec] in direction [dec].
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation The stack manager module failed to retrieve stack messages. The first [dec] is the ASIC
ID, and the second [dec] is the direction.
Recommended Action No action is required.
Error Message STACKMGR-3-NORECORD: Switch removed event for switch [dec] with no
switch record.
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation The stack manager received a switch-removed event for which there is no switch record.
[dec] is the switch number.
Recommended Action No action is required.
Error Message STACKMGR-4-MASTER_ELECTED: Switch [dec] has been elected as MASTER of
the stack.
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation The specified switch has been elected stack master. [dec] is the switch number of the
elected stack master.
Recommended Action No action is required.
Error Message STACKMGR-4-STACK_LINK_CHANGE: Stack Port [chars] Switch [dec] has
changed to state [chars].
Note This message applies only to Catalyst 3750 and 2975 switches.