3-11
Catalyst 3750, 3560, 3550, 2975, 2970, and 2960 Switch System Message Guide
OL-8551-04
Chapter 3 Message and Recovery Procedures
CFGMGR Messages
Error Message CFGMGR-1-UNABLE_TO_SEND_STARTUP_CFG: unable to send startup-cfg, bits:
[hex], retrying...
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation The system is unsuccessfully attempting to distribute the startup configuration file to the
stack member switches. [hex] is the bit representation of the switch number.
Recommended Action Find out more about the error by usin g the show tech-support privileged EXEC
command and by copying the error message exactly as it appears on the console or system log and
entering it in the Output Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For
more information about these online tools and about contacting Cisco, see the “Error Message
Traceback Reports” section on page 2-7.
Error Message CFGMGR-3-ERROR_APPLYING_STARTUP_CFG: Error Applying Startup Config to
Running Config.
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation The system encountered an error when it was automatically applying the startup
configuration to the running configuration.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with th e gathered
information. For more information about these online tools and about contacting Cisco, see the “Error
Message Traceback Reports” section on page 2-7.
Error Message CFGMGR-4-MEMBER_WRITING_STARTUP_CFG: only master can do that.
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation A stack member switch attempted to write to the startup configuration file; only the
stack master can write to the startup configuration file.
Recommended Action No action is required.
Error Message CFGMGR-5-UNABLE_TO_USE_PROVISIONED_CFG: Switch [dec] will receive the
default configuration.
Note This message applies only to Catalyst 3750 and 2975 switches.