3-131
Catalyst 3750, 3560, 3550, 2975, 2970, and 2960 Switch System Message Guide
OL-8551-04
Chapter 3 Message and Recovery Procedures
SUPERVISOR Messages
SUPERVISOR Messages
This section contains the supervisor ASIC message. This ASIC controls the CPU and the switch sending
and receiving ports.
Error Message SUPERVISOR-3-FATAL: [chars].
Note This message applies to Catalyst 3750, 3560, 2975, 2970, and 2960 swi tches.
Explanation An internal error occurred in the supervisor AS IC. [chars] is the detailed error message.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with th e gathered
information. For more information about these online tools and about contacting Cisco, see the “Error
Message Traceback Reports” section on page 2-7.
SUPQ Messages
This section contains the supervisor queue messages. These messages are related to CPU se nd and
receive queues.
Error Message SUPQ-3-THROTTLE_CPU_QUEUE: Invalid application ID [dec] used for
throttling.
Note This message applies to Catalyst 3750, 3560, 2975, 2970, and 2960 swit ches.
Explanation An application has passed an invalid application ID for throttle check. [dec] is the
internal application identifier.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with th e gathered
information. For more information about these online tools and about contacting Cisco, see the “Error
Message Traceback Reports” section on page 2-7.