3-89
Catalyst 3750, 3560, 3550, 2975, 2970, and 2960 Switch System Message Guide
OL-8551-04
Chapter 3 Message and Recovery Procedures
PLATFORM_RPC Messages
PLATFORM_RPC Messages
This section contains platform-specific remote procedure call (RPC) messages. The RPC function in the
switch stack allows instances of code running on the various systems in a stack to intercommunicate by using
a virtual function-call mechanism.
Error Message PLATFORM_RPC-0-RESOURCE_CRASH: [chars].
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation The system is unable to allocate memory for RPC. [chars] de scribes the error message.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with th e gathered
information. For more information about these online tools and about contacting Cisco, see the “Error
Message Traceback Reports” section on page 2-7.
Error Message PLATFORM_RPC-3-BAD_CLASS: Bad Class in RPC message: [int].
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation There is a missing entry in the class table fo r a message class. [int] is the number of the
missing message class.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with th e gathered
information. For more information about these online tools and about contacting Cisco, see the “Error
Message Traceback Reports” section on page 2-7.
Error Message PLATFORM_RPC-3-MSG_THROTTLED: RPC Msg Dropped by throttle mechanism:
type [int], class [int], max_msg [int], total throttled [int].
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation There are too many outgoing messages queued for a message class. An RSP message
was dropped. The first [int] is the message type, the second [int] is the message class, the third [int]
is the maximum number of messages that can be queued before throttling occurs, and the last [int]
is the total number of messages that have been throttled.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or