3-117
Catalyst 3750, 3560, 3550, 2975, 2970, and 2960 Switch System Message Guide
OL-8551-04
Chapter 3 Message and Recovery Procedures
RMON Messages
Explanation The policy-map configuration has exceeded the limitation of the hardware. You
configured more policers together in all policy maps (by using the police or police aggregate
policy-map class configuration command) than supported by hardware. [chars] is the policy-map
name.
Recommended Action Reconfigure the class maps or the policy maps, or delete the policy map fro m
some interfaces.
Error Message QOSMGR-4-POLICER_POLICY_NOT_SUPPORTED: Number of policers has exceeded
per policy hardware limitation for policymap [chars].
Note This message applies only to Catalyst 3750, 3560, 2975, 2970, and 296 0 switches.
Explanation The policy-map configuration has exceeded the limitation of the hardware. You
configured more policers in a policy map (by using the police or police aggregate policy-map class
configuration command) than supported. [chars] is the policy-ma p name.
Recommended Action Reconfigure the class map or the policy map, and re duce the number of
policers.
RMON MessagesThis section contains the remote network monitoring (RMON) messages.
Error Message RMON-5-FALLINGTRAP: Falling trap is generated because the value of
[chars] has fallen below the falling-threshold value [dec].
Explanation A falling trap has been generated. The value of the specified MIB object has fallen
below the falling threshold value. [chars] is the MIB object, and [dec] is the threshold value.
Recommended Action Take appropriate action on the specified MIB object.
Error Message RMON-5-RISINGTRAP: Rising trap is generated because the value of
[chars] exceeded the rising-threshold value [dec].
Explanation A rising trap has been generated. The value of the specified MIB object has exceeded
the rising threshold value. [chars] is the MIB object, and [dec] is the threshold value.
Recommended Action Take appropriate action on the specified object.