3-129
Catalyst 3750, 3560, 3550, 2975, 2970, and 2960 Switch System Message Guide
OL-8551-04
Chapter 3 Message and Recovery Procedures
STACKMGR Messages
Explanation The specified stack port status has changed state to up or down. The first [chars] is the
stack port (1 or 2), [dec] is the switch number, and the second [chars] is the new state (up or down).
Recommended Action No action is required.
Error Message STACKMGR-4-SWITCH_ADDED: Switch [dec] has been ADDED to the stack.
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation The specified stack member switch has been adde d to the stack. [dec] is the switch
number.
Recommended Action No action is required.
Error Message STACKMGR-4-SWITCH_ADDED_SDM: Switch [dec] has been ADDED to the stack
(SDM_MISMATCH).
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation The specified switch has been added to the stack. [dec] is the switch number.
SDM_MISMATCH means that the added switch cannot support the SDM template that the stack
master is using. Subsequent SDM-6-MISMATCH_ADVISE messages explain the mismatch and
recommend corrective actions.
Recommended Action No action is required unless SDM_MISMATCH is displayed. For
SDM_MISMATCH corrective actions, see SDM-6-MISMATCH_ADVISE.
Error Message STACKMGR-4-SWITCH_ADDED_VM: Switch [dec] has been ADDED to the stack
(VERSION_MISMATCH).
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation A switch that has been added to the stack ha s a different software version. [dec] is the
switch number.
Recommended Action No action is required.
Error Message STACKMGR-4-SWITCH_REMOVED: Switch [dec] has been REMOVED from the
stack.
Note This message applies only to Catalyst 3750 and 2975 switches.
Explanation The specified switch has been removed from the stack. [dec] is the switch number.
Recommended Action No action is required.