Samsung 1357B-BD-P1200-XAC Output Selection Feature, Connecting to a TV with HDMI Cable, English

Output Selection Feature

You may choose from HDMI, COMPONENT, S-VIDEO or VIDEO, mode for video output from the player to your TV.

Use the OUTPUT SELECT button on the front panel of the unit to select the video output while the disc is stopped.

-Video Output mode changes as follows when the OUTPUT SELECT button is pressed: HDMI ➞ VIDEO ➞ COMP ➞ HDMI order.

-To select HDMI output, press the OUTPUT SELECT button until the HDMI indicator lights.

-To select COMPONENT output, press the OUTPUT SELECT button until the COMP indicator lights.

-To select VIDEO or S-VIDEO output, press the OUTPUT SELECT button until the VIDEO indicator lights.

■ If HDMI mode is selected for TVs providing display information (EDID), the TV resolution

NOTE	will be automatically changed to the best
	quality supported by the TV.

■If HDMI mode is selected for TVs that do not provide display information (EDID), resolution will be adjusted to 480p.

■If COMP (Component) mode is selected, resolution will be adjusted to 480p initially.

■If VIDEO mode is selected, resolution will be adjusted to 480i.

■Select the resolution from <Setup> ➞ <Display Setup>. (See page 41~42.)

Choosing a Connection

The following shows examples of connections commonly used to connect the Blu-ray disc player with a TV and other components.

Connecting to a TV with HDMI Cable

1. Using the HDMI-HDMI cable (not included) connect	Connecting
the HDMI OUT terminal on the rear of the Blu-ray
disc player to the HDMI IN terminal of your TV.

2. Press the OUTPUT SELECT button on the front panel of the unit until the HDMI indicator lights. Make sure the unit is in Stop mode.

3. Press the input selector on your TV remote control until the HDMI signal from the Blu-ray disc player appears on your TV screen.

• If you have set the remote control to properly operate with your TV (pages 14~15), press the TV INPUT SEL. button on the remote control and select HDMI as the external source of the TV.

HDMI cable (not included)

HDMI Auto Detection Function

Connecting the HDMI cable while the Blu-Ray player's power is on, will automatically change the player's video output mode to HDMI mode.

English - 17