Samsung AK68-01357B manual Movie Frame 24 Fs, Resolution, English, ystemS, Setup, video signal

Movie Frame (24 Fs)

■ No screen will be displayed if the connected TV

Movies are usually filmed at 24 frames per second. Some Blu-ray discs have the capability of playing back at this frame rate. Setting the Movie Frame (24Fs) feature to ON allows you to adjust the Blu-ray player's HDMI output to 24 frames per second for improved picture quality. If your TV cannot support this frame rate, this

NOTE

does not support the resolution selected. If the screen is blank, press and hold the button on the front of the player for more than 5 seconds (no disc inserted). All settings are restored to the factory default. Follow the steps on the previous page to access each mode and select a resolution that your TV will support.

menu cannot be selected,

This menu can only be selected in 1080i or 1080p HDMI output resolution modes.

BD Player		Display Setup
BD
Title	TV Aspect	: 16:9 Wide	√
	Movie Frame(24Fs) : Off		√
Music	Resolution	: 1080i	√
	Screen Message	: On	√
Photo
	Front Display	: Automatic	√
Setup
MOVE	SELECT	RETURN	EXIT

Resolution

Setup	Sets the output resolution of the Component and HDMI
	video signal.
ystemS
		Title	TV Aspect	: 16:9 Wide	√
		BD Player		Display Setup
		BD
			Movie Frame(24Fs) : Off		√
		Music	Resolution	: 1080i	√
		Photo	Screen Message	: On	√
			Front Display	: Automatic	√
		Setup
		MOVE	SELECT	RETURN	EXIT

•Press the OUTPUT SELECT button on the front panel of the unit to select the HDMI mode, and then select from 1080p, 1080i, 720p and 480p.

•Press the OUTPUT SELECT button on the front panel of the unit to select the COMPONENT mode, and then select from 1080i, 720p, 480p and 480i.

•The number in 480i, 480p, 720p, 1080p and 1080i indicates the number of lines of video. The i and p indicate interlace and progressive scan, respectively.

-1080p : Outputs 1080 lines of progressive video.

-1080i : Outputs 1080 lines of interlaced video.

-720p : Outputs 720 lines of progressive video.

-480p : Outputs 480 lines progressive video.

-480i : Outputs 480 lines of interlaced video.

42 - English

■Please refer to page 17 for more information on video output selection.

Resolution according to the output mode

In HDMI mode

BD playback : 1080p, 1080i, 720p, 480p resolutions are available.

DVD playback : 1080p, 1080i, 720p and 480p resolutions are available. However, resolutions not supported by the TV are unavailable.

In COMPONENT mode

•BD playback

Manufacturers of Blu-ray Discs may restrict access to certain video outputs and resolutions. These constraints are referred to as "Tokens". There are three different levels of permission possible, they are:

-Token Disable :1080i, 720p, 480p, 480i resolutions are available.

-ICT Enable : 480p, 480i resolutions are available.

-DOT Enable :Component and all analog outputs are disabled in this token. HDMI must be connected to view a disc with this token.

•DVD playback

480p, 480i resolutions are available.

In VIDEO (S-VIDEO) mode

•BD playback

-Token Disable : 480i is available.

-ICT Enable : 480i is available.

-DOT Enable : Component and all analog outputs are disabled in this token. HDMI must be connected to view a disc with this token.

-DVD playback : 480i is available.

Discs	HDMI mode	COMP mode	Video mode(S-Video,
	(HDMI output)	(Component output)	Video output)
Blu-ray Disc		1080i, 720p, 480p, 480i	480i
Blu-ray Disc with	1080p/60fps,
ICT(Image		480p, 480i	480i
	1080p/24fps,
Constraint Token)
	1080i, 720p,
Blu-ray Disc with
	480p	No picture	No picture
DOT(Digital Only
Token)
DVD	1080p/60fps,	480p, 480i	480i
	1080i, 720p,
	480p