Samsung 20070320082319250, AK68-01357B Connecting to a TV Component, Connecting to a TV S-Video

Connecting to a TV (Component)

-Connecting to your TV using Component video cables.

-You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.)

1.Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the Blu-ray disc player to the COMPONENT IN terminals of your TV.

2.Using the audio cables (not included), connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray disc player to the AUDIO (red and white) IN terminals of your TV. Turn on the Blu-ray disc player and TV.

3.Press the OUTPUT SELECT button on the front panel of the unit until the COMP indicator lights. Make sure the unit is in Stop mode.

4.Press the input selector on your TV remote control until the Component signal from the Blu-ray disc player appears on the TV screen.

•If you have set the remote control to properly operate with your TV (pages 14~15), press the TV INPUT SEL. button on the remote control and select COMPONENT as the external source of the TV.

Connecting to a TV (S-Video)

-Connecting to your TV using an S-Video cable.

-You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode.

(Audio signals are delivered through the audio output.)

1. Using an S-Video cable (not included), connect the S-VIDEO OUT terminal on the rear of the Blu-ray disc player to the S-VIDEO IN terminal of your TV.

2.Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray disc player to the AUDIO (red and white) IN terminals of your TV. Turn on the Blu-ray disc player and TV.

3.Press the OUTPUT SELECT button on the front panel of the unit until the VIDEO indicator lights. Make sure the unit is in Stop mode.

4.Press the input selector on your TV remote control until the S-Video signal from the Blu-ray disc player appears on your TV screen.

•If you have set the remote control to properly operate with your TV (pages 14~15), press the TV INPUT SEL. button on the remote control and select S-VIDEO as the external source of the TV.

Connecting

				GREEN
	WHITE			BLUE
				RED
	RED
	Audio Cable
RED	WHITE	RED	BLUE	GREEN

RED

Component cable (not included)

WHITE

RED

Audio Cable

WHITE

S-Video Cable (not included)

■ Depending on the manufacturer, the

NOTE

component terminals on your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y”. The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV.

English - 19