Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
Setting Up the Rating Level and Changing the Password
1.With the unit in Stop mode, press the MENU button.
2.Press the √/® buttons to select Parental Page, and then press the † or ENTER button.
3.Press the π/† buttons to select Parental/Password, and then press the ® or ENTER button.
4.Press the π/† buttons to select Rating Level you want, then press the ENTER button. e.g) Setting up in KID SAFE.
5.Enter your password. If this is the first time, enter 0000. Then, enter a new password. The new password must be a number other than 0000 to activate the parental control function. Then, re- enter the new password.
Security Levels :
ŒKID SAFE.
´G (General Audiences) : All Ages Admited.
Reference
Firmware Upgrade
Introduction
Upgrading the Firmware will keep your DVD player up to date.
The latest firmware version for this unit is provided on the Samsung Website.(www.samsung.com).
How to make an upgrade disc
You must burn the latest firmware version onto a blank
1. Download a new file from Samsung's website. (www.samsung.com) Download Center.
2. Write the file to disc using
Notes |
|
The CD should be burned following the spec below. |
|
- File System | - Please burn the CD at a low speed. |
- Character set ISO 9660. | - Please make sure the filename C450XEL.BIN |
- The burned CD has to be Finalized. | - Please make sure the root folder rename as |
| MEDIATEK |
|
|
ˇPG (Parental Guidance suggested) : Some material may not be suitable for young children. ¨ PG 13
under 13.
ˆ PGR (Parental Guide Recommended) : These are not necessarily unsuitable for children, but viewer discretion is advised, and parents and guardians are encouraged to supervise younger viewers.
Ø R (Restricted) : Under 17 requires accompanying adult.
∏ NC17
Note :
- If you have forgotten your password, see “Forgot Password” in the Troubleshooting section.
Upgrade procedure
1. Open the disc tray of your
2. Press the ENTER or PLAY to start upgrade.
-Press any other buttons on the remote control or eject the disc to cancel the upgrade.
-During the firmware upgrade process, the tray will open. Please remove the disc and wait for about 2 minutes.
-If the DVD Player was successfully updated, the disc tray will close and the unit will turn off and on. When the unit turns on, the Select Menu Language screen will appear.
Upgrade file detected
Curent version: 09.11.28.00.C450XEL
Update version: 09.12.04.00.C450XEL Upgrade ?
Press Play to start
Firmware upgrade menu appears
Upgrade file detected
Curent version: 09.11.28.00.C450XEL
Update version: 09.12.04.00.C450XEL Upgrade
File Copying
Upgrade file detected
Curent version: 09.11.28.00.C450XEL
Update version: 09.12.04.00.C450XEL Upgrade ?
Upgrading
Firmware upgrade starts
3. Press the π/† buttons to select the desired language, | Select Menu Language |
| |
and then press the ENTER button. | English |
| Français |
| Deutsch |
| Español |
| Italiano |
| Nederlands |
Notes
-If the “Select Menu Language” doesn’t appear, please contact Samsung Customer Service.
-Do not press any button or unplug the power cord during the upgrade.
-The upgrade procedure may change, refer to the web site (www.samsung.com).
-When software is upgrade, video and audio settings you have made will return to their default (factory) set- tings. We recommend you write down your settings so that you can easily reset them after the upgrade.
-Samsung does not assure that all file upgrade discs burned using freeware disc burners will work in the player.
11 
