Setting Up the Audio Options
Audio Setup options let you to set up the audio device and sound status settings depending on the audio system you are using.
1.With the unit in Stop mode, press the MENU button.
2.Press the √/® buttons to select Audio Setup Page, and then press the † or ENTER button.
3.Press the π/† buttons to select the desired item, and then press the ® or ENTER button.
The following describes each option found in the Audio Setup Menu.
❶Dolby Digital Out
-PCM : Converts to PCM(2CH) audio.
-Bitstream : Outputs Dolby Digital via the digital output. Select Bitstream when connecting to a Dolby Digital Decoder.
❷MPEG2 Digital Out
-PCM : Converts to PCM(2CH) audio.
-Bitstream : Converts to
❸Dynamic Range Comp.
-On : To select dynamic range compression. This is useful for watching movies late at night, as it balances the loud and quiet portions of a disc.
-Off : To select the standard range.
❹PCM Down Sampling
-On : Select this when the amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ.
-Off : Select this when the amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes.
❺Power On Music
This menu is used to activate or deactivate the opening sound when you turn on the DVD player
-On : To turn On Start up music
-Off : To turn Off Start up music
Notes
-When play a disc that has MPEG Audio and you have Bitstream selected in the Audio Options menu, the Digital Audio jack may not output audio
-There is no output from the analog audio jacks when you play a DTS sound disc.
-Even when PCM Down sampling is Off, some discs will only output down sampled audio through the digital output.
Manufactured under license from Dolby Laboratories. “Dolby” and the
Inc.
Setting Up the Display Options
Display options enable you to set various video functions of the player.
1.With the unit in Stop mode, press the MENU button.
2.Press the √/® buttons to select Display Setup page, and then press the † or ENTER button.
3.Press the π/† buttons to select the desired item, and then press the ® or ENTER button.
The following describes each option found in the Display Setup Menu.
❶TV Aspect
Depending on a type of television you have, you may want to adjust the screen setting (aspect ratio).
- 4:3 Pan & Scan : Select this for conventional size TVs when you want to see the central por- tion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)
-4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.
-16:9 Wide : You can view the full 16:9 picture on your widescreen TV.
❷Screen Messages
Use to turn
❸Video Output
Select Video Output.
-
-
•If the Yes/No selection in the Display Setup sub Menu is not made within 10 seconds, the screen returns to the previous menu.
❹Black Level
Adjust the brightness of the screen. (On or Off) It does not function in Progressive mode. This feature only functions in Video Composite mode.
Notes :
•Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.
•If Video Output is set incorrectly, the screen may be blank.
10