Selecting the Automatic Operating Mode

You can start the air conditioner in the Automatic mode.

In the Automatic mode, the temperature and the optimum fan speed is selected automatically.

1If necessary, press the (On/Off) button.

Result:The power indicator on the control panel comes on.

The indoor unit beeps.

IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

Switched on

Stopped

lt will start up normally after three minutes.

2If the is not displayed on the control panel, press the button on the remote control one or more times until it appears.

Result:The indoor unit beeps each time you press the button.

The air conditioner runs in the Auto mode.

Note You can change modes at any time.

If the indoor temperature is higher than 21°C, the air conditioner operates in the Cool mode. If the indoor

temperature is lower than 21°C, the air conditioner operates in the Heat mode.

3To control the direction of the air flow, refer to page 16.

Cooling operation

Heating operation

E-11

Page 11
Image 11
Samsung AP50Q1CNMID manual Selecting the Automatic Operating Mode