operating basic function
SELECTING OPERATION MODE
Heat [ For AQA model ]
The air conditioner heats as well as cools. Warm your room with this versatile appliance in the cold of winter.
1.Turn on the air conditioner.
Press the Power 
button on the remote control.
2.Set the operating mode.
Press the Mode button on the remote control until Heat mode indicator appears on the remote control display. The air conditioner operates in Heat mode and warms your room.
When you press the Mode button, the mode will change in order of Auto, Cool, Dry, Fan and Heat.
3.Set the temperature.
Press the Temperature or button on the remote control to decrease or increase the desired temperature.
You can set the desired temperature between the range of 16˚C~30˚C.
You can decrease/increase the temperature by 1˚C.
4.Set the fan speed.
Press the Fan Speed button on the remote control to set the desired fan speed.
When room temperature reaches the desired temperature, heating will temporarily stop.
• When you press the Fan Speed button, fan speed will change in order of Auto, Low, Medium and High.
• Fan may not operate for about 3~5 minutes at the beginning to prevent any cold blasts while the air conditioner is warming up.
•Air flow can be adjusted manually. (See page 19 for instructions.)
•Since the air conditioner heats the room by taking heat energy from outdoor air, the heating capacity may decrease when outdoor temperatures are extremely low. If you feel the air conditioner insufficiently heats, using an additional heating appliance in combination with the air conditioner is recommended.
18_ operating
Montblanc2_IB_29002A_E.indd 18
