Cleaning the air conditioner

•Make sure the power is turned off and unplugged from

the wall socket when cleaning the air conditioner. Cleaning the indoor unit

Wipe the surface of the unit with a slightly damp micro fiber cloth when needed.

• Contact the service center when you clean the indoor unit

heat exchanger because it needs to be disassembled.

•Since the panel of the indoor unit is easily scratched, you should use a micro fiber cloth to clean the panel.

When you use the micro fiber cloth, slightly dampen the cloth and remove any debris on the cloth to avoid scratches.

• Do not clean the display using alkaline detergent.

• Do not use sulfuric acid, hydrochloric acid, organic solvents (such as thinner, kerosene and acetone etc.) to clean the surface of the product or put any stickers on it.

They may damage the surface of the air conditioner.

Cleaning the outdoor unit heat exchanger

When dust accumulates on the heat exchanger, it may decrease cooling performance. Therefore, clean it regularly.

Spray water to clean the dust.

• If it is difficult to clean the outdoor unit heat exchanger on

your own, contact service center.

•Be careful with the sharp edges on the outdoor unit heat

exchanger.

Opening the panel

Tightly grip each side of the front panel and lift the panel up to open. Then release the panel which should be automatically positioned to hold the panel open.

To close the panel, slightly lift up the front panel while pushing gently and lower the panel.

ENGLISH

Heat exchanger

(Illustration may differ slightly depending on the models)

19

AQV09K&Y@@_Jungfrau_IBIM_E_32448A.indd 19

 

 

2011-3-19 15:45:11