Choosing the installation location

When the walls are blocking front and the rear side of the outdoor units

 

 

300 or more

600 or more

600 or more

1500 or more

(Unit : mm) When the upper part of the outdoor unit

and the air outlet is opposite the wall

moreor500

300 or more

 

When front and rear side of the outdoor unit is towards the wall

500 or more

300 or more

1500 or

600 or

3000 or

3000 or

200 or

more

more

more

more

more

If installation is done in inappropriate space, unit may generate sound and cause bad effect on the product. • Installation must be done in level and in a place where vibration will not cause any effect.

Accessories

The following accessories are supplied with the air conditioner:

• The number of each accessory is indicated in parentheses.

Accessories in the indoor unit caseIf using a multi system, refer to the manual supplied with the outdoor unit.

Installation Plate (1)

Remote controller

Batteries for

User’s & Installation Manual (1)

Remote controller (2)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Accessories in the outdoor unit case

If using a multi system, refer to the manual supplied with the outdoor unit.

4-wire Assembly Cable (1)

Drain Plug (1)

Rubber Leg (4)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• The flare nuts are attached to the end of each pipe of an evaporator or a service port.

Use the nuts when connecting the pipes.

The 4-wire assembly cable is optional. If it is not supplied, use the standard cable.

The drain plug and rubber leg are only included when the air conditioner is supplied without the assembly pipe as seen in the picture.

28

AQV09K&Y@@_Jungfrau_IBIM_E_32448A.indd 28

 

 

2011-3-19 15:45:27