Checking the usage time

This function will displayed the accumulated operation time from the moment the air conditioner was turned on to the point when the usage function has been selected.

When the air conditioner is operating;

1.

Press the Settings button..

2.

Press the

button until (Usage) indicator starts to blink..

3.

Press the SET button to check the usage time..

 

-- (Usage) will blink on the remote controller display and disappear..

 

-- Usage time will be displayed in hour. 0.1 equals to 6 minutes.

Ex) 0..1 6 minutes of usage, 2..5 2 hours and 30 minutes of usage, 3..7 3 hours and 42 minutes of usage..

-- Usage time will be displayed for certain period of time and it will automatically changed to indoor temperature.

-- Usage time will begin to accumulate when the air conditioner turns on, and accumulated usage time will be reset when it turns off.

-- Initial value of usage time is 0..0 and maximum value is 99.. (Unit: hour)

• When the air conditioner is not operating, usage time will not be

Indoor unit display

displayed on the indoor unit display.

 

Using the Auto clean function

Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with clean air.

When the air conditioner is operating;

1. Press the Settings button..

2. Press the button until (Clean) indicator starts to blink..

3. Press the SET button to set the Auto clean function..

-- (Clean) indicator will be displayed on the remote controller display and Auto

clean (

) and Timer ( ) indicator will turn on the indoor unit display.. Auto

clean function will be activated after the air conditioner stops operating..

-- Duration of the Auto clean function can be different depending on the previous operation mode used.

Auto(cool), Cool, Dry mode : 30 minutes.

Auto(heat (ARJQ)), Heat (ARJQ), Fan mode : 15 minutes.

Cancel

fFPress the Settings button again to make the (Clean) indicator blink and

 

 

 

press the SET button..

Indoor unit display

 

 

• When the operation mode is set during Auto clean function is activated,

 

 

 

 

 

 

 

 

the air conditioner will operate in chosen operation mode and the Auto

 

 

 

clean function will be re-activated when the operation stops.

•During the auto clean function, indoor fan will continue to run and air flow blade will remain open to expel ambient air.

•lighting in Auto clean mode.

English-25

SETTINGS 05

MG_BETTER_ON&OFF_A3050_IB&IM_EN_DB68-04534A.indd 25

 

 

2014/9/26 16:28:05