Smart Install mode
This model supports Smart Install mode which checks installation status to find out if there is any problems with any of the functions.. Execute Smart Install mode after installation..
1.Check the installation status of the air conditioner..
1)Check the power supply, service valve (if it's open), power cable of the indoor and outdoor unit and amount of additional refrigerant required for pipe extension..
2)Status of the indicator after supplying the power : Standby status
2.When the air conditioner is in standby status, use the remote controller to start the Smart Install mode..
1)Press the [SET], [Mode], [Power] button simultaneously for 4 seconds..
fFSmart Install mode can be operated only with the supplied remote controller.. fFDuring the Smart install mode procedure, remote controller cannot be operated..
❋❋Remote controller may be different (image/functions) depending on the model..
English-54
2014/9/26 16:28:12
