1Cut out the appropriate knock-out piece (A, B, C) on the rear of the indoor unit unless you connect the pipe directly from the rear.

2Smooth the cut edges.

3Remove the protection caps of the pipes and connect the assembly pipe to each pipe. Tighten the nuts first with your hands, and then with a torque wrench, applying the following torque:

Outer diameter (mm)

Torque (N•m)

Torque (kgf•cm)

 

 

 

ø 6.35

14 to 18

140 to 180

 

 

 

ø 9.52

34 to 42

350 to 430

 

 

 

ø 12.70

49 to 61

500 to 620

 

 

 

ø 15.88

68 to 82

690 to 830

 

 

 

Step 2.7 Shortening or extending the refrigerant pipes (assembly pipe)

 

 

Pipe cutter

 

 

 

Pipe

 

90°

Oblique

Rough

Burr

NOTE

•If you want to shorten or extend the pipes, see Step 2.7 Shortening or extending the refrigerant pipes (assembly pipe) on page 41.

4Cut off the remaining foam insulation.

5If necessary, bend the pipe to fit along the bottom of the indoor unit. Then pull it out through the appropriate hole.

•The pipe should not project from the rear of the indoor unit.

•The bending radius should be 100 mm or more.

6Pass the pipe through the hole in the wall.

NOTE

•The pipe will be insulated and fixed permanently into position after finishing the installation and the gas leak test. For further details. see Step 4.1 Performing the gas leak tests on page 47.

D

 

90°±2°

 

 

 

A

45°±2°

 

 

 

 

L

 

 

R 0.4 to 0.8

Pipe

Flare

D

 

 

 

 

(Unit: mm)

Outer diameter (D)

Depth (A)

Flare dimension (L)

ø 6.35

1.3

8.7 to 9.1

ø 9.52

1.8

12.8 to 13.2

ø 12.70

2.0

16.2 to 16.6

ø 15.88

2.2

19.3 to 19.7

Flare nut

CAUTION

•Tighten the flare nut with a torque wrench according to specified method. If the flare nut is over-tightened, the flare may break and cause refrigerant gas leakage.

•Do not box in or cover the pipe connection. All refrigerant pipe connection must be easily accessible and serviceable.

Indoor outlet pipeConnecting pipe

Outer diameter (mm)

Torque (N•m)

Torque (kgf•cm)

 

 

 

ø 6.35

14 to 18

140 to 180

 

 

 

ø 9.52

34 to 42

350 to 430

 

 

 

ø 12.70

49 to 61

500 to 620

ø 15.88

68 to 82

690 to 830

 

 

 

English 41

Installation

EN_DB68-06045A-01.indd 41

2/23/2017 1:07:59 PM

Page 41 Page 43
Page 42
Image 42
Samsung AR18MQFHCWKXMG, AR24KRFHRWK/MG, AR24MQFHRWKNMG manual Shortening or extending the refrigerant pipes assembly pipe
Page 41 Page 43

AR24MRFHRWKNMG, AR24MQFHRWK/MG, AR24KQFHRWKNMG, AR18MRFHCWKNMG, AR18MQFHCWKNMG specifications

The Samsung AR24MRFHRWK/MG, AR24MRFHRWKXMG, AR24KRFHRWKNMG, AR24MQFHRWKNMG, and AR24KRFHRWK/MG are part of Samsung's innovative line of air conditioning units designed to deliver optimal cooling and heating performance. These models cater to diverse consumer needs, featuring advanced technology, energy efficiency, and user-friendly designs.

One of the standout features of these air conditioning units is the Digital Inverter Technology. This technology allows the compressor to operate at variable speeds, significantly reducing energy consumption while maintaining a consistent temperature. Unlike traditional air conditioners that frequently turn on and off, the inverter compressors adjust their speed according to the cooling demand. This not only saves energy but also enhances the lifespan of the unit.

These models also emphasize air quality through a multi-stage filtration system. The filters effectively capture dust, allergens, and other particles, ensuring that the air circulated within the room is clean and healthy. The long-lasting filters are designed for ease of maintenance, allowing users to replace or clean them with minimal effort.

Moreover, the cooling efficiency is backed by a range of features aimed at enhancing comfort. The models come with a fast cooling mode that allows users to achieve desired temperatures quickly, ideal for those hot summer days. Additionally, the units are equipped with a Quiet Mode, ensuring minimal noise levels, making them suitable for use in bedrooms or workplaces.

Energy efficiency is a key characteristic of the Samsung AR24 series. With a high Energy Efficiency Ratio (EER) and seasonal energy efficiency ratings, these models not only lower energy bills but also contribute to a reduced environmental impact.

Smart technology integration is another compelling aspect of these units. Users can control their air conditioning systems remotely via smartphone applications, allowing for temperature adjustments and scheduling from anywhere. This feature enhances convenience and ensures that spaces are pre-cooled or heated before arriving home.

Further enhancing user experience, the sleek design of these models ensures they fit seamlessly into modern interiors. Their compact and stylish appearance makes them a visually appealing addition to any space, whether residential or commercial.

In summary, the Samsung AR24 series showcases advanced air conditioning technology combined with energy efficiency, ease of use, and superior air quality features, establishing it as an excellent choice for consumers looking for reliable and stylish climate control solutions.
Top Page Image Contents