Samsung AR24NSFHEWKNMG Power supply line, fuse, or circuit breaker, Installation manual

Installation

this reason, where it is not observed as indicated into the Installation Manual, the cost necessary to reach and repair the unit (in safety, as required by current regulations in force) with slings, trucks, scaffolding or any other means of elevation won’t be considered in-warranty and will be charged to end user.

•When installing the outdoor unit at the seaside, make sure that it is not directly exposed to sea breeze. If you cannot find an adequate place free from direct sea breeze, construct a protection wall or a protective fence.

–– Install the outdoor unit in a place (such as near buildings etc.) where it can be protected from sea breeze. Failure to do so may cause a damage to the outdoor unit.

	Sea breeze			Sea breeze
Sea		Outdoor unit	Sea		Outdoor unit

•If you cannot avoid installing the outdoor unit at the seaside, construct a protection wall around to block the sea breeze.

•Construct a protection wall with a solid material such as concrete to block the sea breeze. Make sure that the height and the width of the wall are 1.5 times larger than the size of the outdoor unit. Also, secure a space larger than 600 mm between the protection wall and the outdoor unit for exhausted air to ventilate.

Sea breeze Protection wall

Outdoor unit

Sea	Outdoor unit
	Protection wall

•Install the unit in a place where water can drain smoothly.

•If you have any difficulty finding installation location as prescribed above, contact your manufacturer for details.

•Be sure to clean the sea water and the dust on the heat exchanger of the outdoor unit and apply a corrosion inhibitor on it. (At least once in a year.)

Power supply line, fuse, or circuit breaker

•Always make sure that the power supply is compliant with current safety standards. Always install the air conditioner in compliance with current local safety standards.

•Always verify that a suitable grounding connection is available.

•Verify that the voltage and frequency of the power supply comply with the specifications and that the installed power is sufficient to ensure the operation of any other domestic appliance connected to the same electric lines.

•Always verify that the cut-off and protection switches are suitably dimensioned.

•Verify that the air conditioner is connected to the power supply in accordance with the instructions provided in the wiring diagram included in the manual.

•Always verify that electric connections (cable entry, section of leads, protections…) are compliant with the electric specifications and with the instructions provided in the wiring scheme. Always verify that all connections comply with the standards applicable to the installation of air conditioners.

•Be sure not to perform power cable modification, extension wiring, and multiple wire connection.

–– It may cause electric shock or fire due to poor connection, poor insulation, or current limit override.

–– When extension wiring is required due to power line damage, refer to "Step 2.2 Optional:Extending the power cable" in the

installation manual.

28English