Aastra Telecom ATP-CNX-040-01 manual

CNX System Administrator Guide

Prepare for hardware installation

What you need for a single installation

•One Aastra CNX unit

•One AC power cable

•One CompactFlash memory card

•One set of rack mounting brackets with six (6) Phillips head screws

•Truss head screws (not provided)

•One to four RJ-48C T1/E1 cable(s) (not provided)

Note: T1/E1 Ports 1, 2, 3, and 4 are available for the 30, 60, and 120 port units.

•One 9-pin male DB-9 to female DB-9, RS-232 serial cable

•One or two RJ-45 10/100BaseT Ethernet cable(s) (not provided)

•(Optional) One 9-pin male DB-9 to female DB-25, RS-232 serial cable for modem connections (not provided)

In addition to the parts listed above, the following tools are also required when installing an Aastra CNX rackmount unit:

•#2 Phillips screwdriver

•Torque wrench

•Nutdriver set

1-2	ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07