Aastra Telecom ATP-CNX-040-01 manual Procedures, Step, Action, Attribute, Default, For T1 Framing

Configuring the Aastra CNX

Procedures

Step	Action
10	Configure the attributes as required.
		Attribute	Default	Valid Values/Description
		Framing Type	T1 FRAMING	T1 FRAMING
				E1 FRAMING
		Clocking	PORT 1 CLOCK	INTERNAL CLOCK
				PORT 1 CLOCK
				PORT 2 CLOCK
				PORT 3CLOCK
				PORT 4CLOCK
				INTERNAL CLOCK - Uses the internal Aastra CNX
				clock for synchronization on TDM links.
				PORT 1 thru PORT 4 CLOCK - Uses the external
				clocking on port 1 thru port 4, respectively, for
				synchronization on TDM links.
		Switch Type	For T1 Framing:	For T1 Framing:
			DMS 100	DMS 100
				5ESS
			For E1 Framing:	NI2
			ETSI	FXO Loop Start
				FXO Ground Start
				FXS Loop Start
				FXS Ground Start
				E&M
				For E1 Framing:
				ETSI
				Description: Specifies the switch type for the ISDN
				PRI connection.
				Descriptions of T1 Switch Types:
				DMS 100 - Northern Telecom Inc. DMS-100
				5ESS - Lucent 5ESS
				NI2 - North American National ISDN 2 (NI2)-compliant
				switch

ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-23