Aastra Telecom ATP-CNX-040-01 manual Global configuration attributes

CNX System Administrator Guide

Procedures

Step Action

4Global configuration attributes continued

(cont’d)

Attribute	Default	Valid Values/Description
Permanent Ports	0	0 to 120
Note: This attribute must		Note: Values are:	0 to 30 for 30-port unit
be set to an appropriate			0 to 60 for 60-port unit
number of ports before			0 to 120 for 120-port unit
using Permanent		Description: Number of ports reserved for permanent
conferences.
		conferences. This value is subject to ports being physically
		configured on the Aastra CNX, either T1/E1 ports and/or
		VoIP ports. It is also subject to the licensed number of
		ports.
		Note: Permanent ports are not available for scheduled
		conferences.
		You must provision the T1/E1 ports, SIP service, or H.323
		service on the Aastra CNX before setting the Permanent
		Port value. See the following table for applicable settings.
		Physical Ports Enabled Maximum Permanent Port Value
		1 T1	23
		2 T1s	46
		4 T1s	92
		1 E1	30
		2 E1s	60
		4 E1s	120
		SIP or H.323 service enabled 30
			60
			120

5

Click to save the configuration to the Aastra CNX and to the CompactFlash card.

3-18 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07