CNX System Administrator Guide
Startup and check the Aastra CNX
Illustration
POWER | 1 | 2 | 3 | 4 |
1 2 |
|
| ACTIVE | |
STATUS |
|
|
| ALARM |
| 10/100 ENET | T1 | / E1 | |
Alarm Indicators
To check alarm indicators on the Aastra CNX:
Step Action
aCheck that the Status LED is not ON Red. If the Status LED is ON Red, an alarm condition exists in the unit. Contact your System Administrator.
Note: During bootup of the Aastra CNX, the Status LED is ON Red for 1 second. This is a normal condition at bootup.
bWhen the T1/E1 port(s) are enabled, check that the T1/E1 LEDs on the bottom row are OFF. If the T1/E1 LED(s) on the bottom row are ON Amber, a yellow alarm is present on the T1/E1 link. If the T1/E1 LEDs are ON Red, a Red alarm is present on the T1/E1 link. Contact your System Administrator.
