Aastra Telecom ATP-CNX-040-01 manual Procedures, Step, Action, Attribute, Default

Configuring the Aastra CNX

Procedures

Step	Action
6	Configure the attributes as required.
		Attribute	Default	Valid Values/Description
		H.323 service	DISABLE	ENABLE
				DISABLE
				Description: Enables or disables the H.323 protocol
				on the Aastra CNX. H.323 is an international standard
				protocol for multimedia communication over
				packet-switched networks, including LANs, WANs,
				and the Internet.
		H.323 Identification	CNX	Description: The equipment that has H.323 enabled
		Note: Enabled only if		in the network.
		H.323 service is set to
		ENABLE.
		Bind Address	ETHERNET	ETHERNET INTERFACE 1
		Note: Enabled only if	INTERFACE 1	ETHERNET INTERFACE 2
		H.323 service is set to		Description: Specifies the interface on the Aastra
		ENABLE.		CNX that is being used to gain access to the H.323
				gatekeeper.
		Gatekeeper	DISABLE	ENABLE
		Registration		DISABLE
		Note: Enabled only if		DISCOVER
		H.323 service is set to		Description: Enables or disables the Aastra CNX to
		ENABLE.		locate the H.323 Gatekeeper. If set to DISCOVER,
				the Aastra CNX searches until it discovers the
				Gatekeeper when specifying by IP address or
				hostname.
				Note: When using H.323, the Aastra CNX functions
				as a terminal appearing as a peer to H.323-based IP
				phones. You can configure the Aastra CNX to work
				with one or more H.323 gatekeepers.

ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-35