CNX System Administrator Guide

Record type

Found in

Found in

Aastra CNX generates the record in a log....

cdrlog files

confcdrlog files

 

 

 

 

CALL_END

 

-

when a user disconnects a call or is disconnected

 

 

 

from the Aastra CNX using call types of TDM, SIP,

(Call End Record)

 

 

or H.323. A CALL_END record includes:

 

 

 

Caller ID

(integer)

 

 

 

Conference ID

(interger)

 

 

 

Call type

(TDM/SIP/H323)

 

 

 

Caller

(SIP/H323 address of the

 

 

 

 

 

caller or the caller’s phone

 

 

 

 

 

number)

 

 

 

Reason

(Disconnect cause)*

 

 

 

Duration in minutes

*Disconnect causes could be any of the following:

Disconnect

Description

cause

 

 

 

NORMAL

Normal call clearing (for

 

example, a hang-up during a

 

conference).

 

 

SHUTDOWN

System was shutting down.

 

 

NO_RESOURCES

All 30/60 ports in use.

 

 

LOGIN_FAILED

Incorrect pin entered. This

 

cause may log even if a user

 

enters the wrong pin once, and

 

then hangs up.

 

 

NOT_STARTED

Attempted to log into a

 

conference that has not yet

 

started.

 

 

NO_PORTS

All the reserved ports for the

 

conference are in use.

 

 

EJECTED

The moderator ejected the user

 

off of the bridge.

 

 

CONF_OVER

User is ejected from the

 

conference because the

 

conference time was up.

 

 

INTERNAL_ERROR

An error condition on the CNX

 

occurred; check the logs for

 

error messages.

 

 

UNKNOWN

Unknown error

 

 

B-4

ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07

Page 180
Image 180
Aastra Telecom ATP-CNX-040-01 manual Callend, Disconnect Description Cause