Aastra Telecom ATP-CNX-040-01 Chapter Configuring the Aastra CNX, Initial configuration, Overview

Models: ATP-CNX-040-01

1 190
Download 190 pages 27.62 Kb
Page 55
Image 55
Chapter 3

Chapter 3

Configuring the Aastra CNX

Overview

Description

You perform an initial configuration of the Aastra CNX from the console port. Initial configuration includes setting specific essential parameters, including the unit’s network settings. Successful initial configuration allows you to complete the unit’s software configuration using a web-based GUI.

Initial configuration

After installing the Aastra CNX, you must initially configure the unit to operate in your network by specifying its hostname, Ethernet IP address, Netmask, default gateway, NTP servers, and date and time. When you power up the Aastra CNX for the first time, a setup script runs to allow you to initially configure the unit for your network.

Reference

For more information about the Aastra CNX hardware installation and for a procedure to perform the initial configuration, see the Aastra CNX Conference Network Switch Installation and Setup Guide.

ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07

3-1

Page 55
Image 55
Aastra Telecom ATP-CNX-040-01 Chapter Configuring the Aastra CNX, Initial configuration, Overview, Description, Reference