Configuring the Aastra CNX
Overview
|
|
| (4) Configure Network Time Protocol (NTP) | ||
|
|
| This option allows you to modify the Network Time Protocol (NTP) that you set | ||
|
|
| during the “Run network and time configuration” procedure. Use the following | ||
|
|
| procedure to modify the NTP on the Aastra CNX. | ||
|
|
|
|
|
|
|
|
|
|
| Note: If at any time during the initial configuration process, you want to |
|
|
|
|
| |
|
|
|
|
| backout of the configuration, press <ESC> to cancel. |
|
|
|
|
| |
|
|
| |||
|
|
|
|
|
|
Step | Action | ||||
|
|
| |||
1 | At the Aastra CNX Main Menu, select option 4, and press <Enter>. | ||||
|
|
|
|
| Welcome to the |
|
| Aastra CNX - Conference Bridge | |||
|
|
|
| Configuration Utility | |
| 1. Run network and time configuration | ||||
| 2. | Change Telnet access | |||
| 3. Set date and time | ||||
| 4. Configure Network Time Protocol (NTP) | ||||
| 5. | Force reboot | |||
| Please select an option: 4 ↵ | ||||
| The following message and prompts display: | ||||
| Configuring Network Time Protocol (NTP)... | ||||
| You can configure up to 4 NTP servers. To remove an existing | ||||
| server, set it's address to 0.0.0.0. If no valid servers are | ||||
| given then ntp will be disabled. | ||||
| Do you want to continue (y/n) [n]: | ||||
|
| ||||
2 | Enter “y” to continue, and press <Enter>. | ||||
| The following prompts display: | ||||
| NTP Server #1: [pool.ntp.org]: | ||||
| NTP Server #2: [pool.ntp.org]: | ||||
| NTP Server #3: [pool.ntp.org]: | ||||
| NTP Server #4: [pool.ntp.org]: | ||||
|
|
|
|
|
|
|
|
|
|
| (continued) |
