5. Wireless LAN Configurations
3.Press the Point button then the “Please wait...” message will appear and switching operation will start. Switching will take a while and after completing the operation the message will disappear. During the switching period, the projector cannot be operated.
Wireless setting
User PIN code
Wireless Information
Wireless Factory Default
4.Press the SELECT button. LAN setting screen will appear and the selected LAN settings will be displayed. Adjust each item to the setting environment. Consult your system administrator for the detailed settings.
Adjust the figures with the Point ed buttons and move among the items with the Point 7 8 buttons. When the network type is “AdHoc”, you do not have to change “Sub net” and “Gateway” and leave them as default settings.
SSID/ESSID/BSSID for the network type “Infrastructure” and “AdHoc” are required to be entered the same characters into the projector, the access point, and the Wireless LAN compatible computer (up to 32 characters). Characters can be selected from A~Z, a~z, blank (space),
You can confirm that the projector settings from “Wireless Information” in the projector menu (p.37).
✳IP address can be set from the command of Windows. Refer to “11. Appendix” ➔
“Setting up the IP address with "arp" + "ping" command” (p.96).
5.After completing all the settings, select “Set” and press the SELECT button. Now, all procedures has done. To cancel the adjusted settings, select the CANCEL button before clicking the SET button.
To confirm whether the settings are correct, follow the procedures in “4. Wired LAN configurations” ➔ “Confirming the Operation”
For configuring of WEP security, select “Next”. Refer to “11. Appendix”➔ “Configuring WEP security with the projector” on page 97 for details.
35
