4. Wired LAN Configurations

Confirming the Operation

Confirm that the projector has connected to the LAN properly.

1.Activate “NetworkModule Client” or “NetworkModule Moderator” which is installed into the computer connected to the LAN .

2.After appearing “NetworkModule searching” message, the name of the projector* appears on the Network Projector List, then the network setting has completed properly.

When the name of the projector does not appear and error screen appears, the network has not connected yet. Try searching again with the Refresh List button. If error screen appears again, reconfirm the LAN setting. When the projector is set where separated by the router, see next page.

When Firewall function (Anti-virus software) is effective, network projector may not be found. In that case, disable the Firewall function and try searching again.

If the projector is named, the name will be displayed. The name can be set with following the procedures in “6. Configurations with Browser” “Quick Setup” (pp.44–45) or “Advanced Setup” “Miscellaneous” (p.52). If the projector is not named, MAC address of the projector will be displayed.

NetworkModule Client screen

Error screen

Refresh List button Network Projector List

28

Page 28
Image 28
Sanyo XG-705A owner manual Confirming the Operation