Sanyo XG-705A owner manual Preparation for Using the Moderator Function

8. Use the Moderator Function

Preparation for Using the Moderator Function

First, follow the procedure in “2. Setup Procedure” ➔ “Step 1–3” (p.16) and confirm that the setting status is set as written below.

•Client application (NetworkModule Client) is installed on each client’s (except for the moderator) computer and each client’s computer image can be projected.

•Moderator application (NetworkModule Moderator) is installed on the moderator’s computer and moderator’s computer image can be projected.

Preparation Procedure for Using the Moderator Function

1.Configure the Moderator Login password in the projector to put the projector under moderator’s control (p.51).

2.Resister a moderator in the projector with the moderator screen. Set the Session password at this step. After the registration, only the moderator can control the projector and clients cannot operate.

3.Each client registers to join the moderator’s group.

Now, Moderator function is set. The moderator and the clients can start the meeting with Moderator function.

Network Projector List

Moderator login button

Exit moderator status

Client List

Start Remote

Capture button

Stop Remote

Capture button

Set Session Password

button

button

59