10. How to Use the PJ Controller

Control

When you select Control from the main menu, Control Menu will appear at the bottom of the screen. Using this menu, you can adjust or configure the projector.

Note:Control items displayed on this screen are varied depending on the input source or product model of the projector. So the figures shown in this section may be different from the actual screen displayed on your computer. For further details, refer to the owner’s manual of your projector. This function is not available if the projector is turned off.

Control Menu

Input

On this screen, you can select an input source of the projector. Check the input terminal and select the signal mode from the pull-down menu. Click Set button to switch the input.

You can save a note in Comment field. Click Save button to save the note.

Parameter

Description

Wireless/

WiredSelect this input when using the Screen Capture or the Network Viewer function.

Computer 1(Analog)

..........Select the computer analog input.

Computer 1(Digital)

Select the input source from “RGB(Digital)” or “RGB(AV HDCP)”.

Computer 2

Select the input source from “RGB”,”Component“, and “RGB (Scart)”.

Video

Select the input source from “AUTO”, “VIDEO”, and “S-VIDEO”.

 

 

 

80

Page 80
Image 80
Sanyo XG-705A owner manual Control, Input