10. How to Use the PJ Controller

Service

Items on this screen are used for maintenance of the projector.

Parameter

Description

Video System

......Display the current video system.

Horizontal

Click 7 8 buttons to adjust horizontal

 

screen size.

Vertical

Click 7 8 buttons to adjust vertical

 

screen size.

Position

Click 7 8ed buttons to adjust the

 

screen position.

Initialize

Reset all the service items to the factory

 

default settings.

If you select Wired, Wireless Computer1 (Analog/Digital) or Computer 2 (RGB) for the input source, these items are not shown and “No items are shown in the current input mode” will be displayed.

Save Actual Adjustment

On this screen, you can save and load the setting. The items you can save are as follows: Input, PC adjustment, System Adjustment, Image Adjustment, Screen and Setting.

1. Confirm the actual adjustment

When you click Save icon in the Control Menu, the “Save Actual Adjustment” screen will appear. Check each setting. (Go to the next page.)

The figure shows only a part of the full screen.

87

Page 87
Image 87
Sanyo XG-705A owner manual Service, Confirm the actual adjustment