
86
10. How to Use the PJ Controller
Parameter | Description |
|
|
Language ..........................Select the desired language from the | |||
Auto Setup........................Automatically set PC adjustment and correct keystone distortion. | |||
| Auto PC Adjust. ... | Select “On” to automatically set the PC adjustment. | |
| Auto Keystone ............Select Auto to automatically correct keystone | ||
|
| distortion, and select “Manual” to set keystone distortion | |
|
| when the Auto set button is clicked. | |
Keystone ..........................Press the ed buttons to correct keystone distortion. | |||
| Check the High Speed box if you wish to increase the variation. Click OFF if you do | ||
| not need this function. | ||
Blue Back..........................Select “ON” or “OFF” to display/hide blue background when no signal is detected. | |||
Display ..............................Select “ON”, “OFF”, or “Count Down Off” to display/hide the screen. | |||
Logo Select ......................Select the image to show on the | |||
| “OFF”. |
|
|
Capture ............................Click “YES” to capture the projected image. The captured image can be used for | |||
| the | ||
Ceiling ..............................By clicking “ON”, the image gets reversed vertically and horizontally to adjust to | |||
| |||
Rear ..................................By clicking “ON”, the image gets reversed horizontally to adjust to rear projection. | |||
Terminal ............................Select “Computer 2” or “Monitor Out” from the | |||
Input Search......................You can set automatic selection mode for Input Search. | |||
Standby Mode ..................Click “Normal” or “Eco” to set the Standby Mode of the network. | |||
No Show ..........................By clicking “ON”, the image will be temporarily hidden from view. | |||
Freeze ..............................By clicking “ON”, the image will temporarily freeze. | |||
Power Management ........Select “Ready”, “Shut Down”, or “OFF” from the | |||
| |||
On Start ............................By clicking “ON”, the projector will be automatically turned on when the power | |||
| plug is connected to AC outlet. | ||
Lamp Control ....................Select the Lamp Mode from “Normal”, “Eco”, and “Auto”. | |||
Pointer ..............................Select the shape of the Pointer from | |||
| “Pointer”, “Finger”, and “Laser”. | ||
Remote Control ................Select Remote Control Code from Code1 to Code 8. If you change the code here, | |||
| you have to change the code of the remote control product at the same time. | ||
Key Lock ..........................To lock the projector, select “Projector Keys” (Locks the top panel operation)or | |||
| “Remote Control” (Locks the remote control operation). If you do not need to lock, | ||
| select None. |
|
|
Fan ....................................Adjust the rotating speed of the cooling fans. “L1” is normal and “L2” is slower | |||
| and quieter mode. |
|
|
Fan Control ......................You can choose running speed of the cooling fan. | |||
Lamp Counter ..................You can reset the lamp counter. | |||
| Reset the lamp counter only when you change the lamp. | ||
Filter Counter ..................You can set the length of time to use the filter. You can also reset the Filter | |||
| Counter. Reset only when you clean filter or replace filter. | ||
Factory Default ................If you wish to reset all the values you set in the control menu, click “Yes”. | |||
| again and the elapsed time will appear. Click again and the timer will disappear. |