9. How to Use Network Viewer
Projecting the Image
Operation can be made with any of 1) PJ Controller, 2) Browser, or 3) Projector.
When operating with the projector, first, set the FTP server which provides images with 1) PJ Controller or 2) Browser.
Operate as follows.
1) Operating with the PJ Controller
1.Select the projector input (Wired /Wireless).
Select “Wireless” for Wireless LAN and “Wired” for Wired LAN for the input source of the projector. Activate “NetworkModule Client” or “NetworkModule Moderator”.
Detected projector names and IP addresses will be displayed.
2.Specify the projector to display the image.
Only one projector can be selected. | Select the |
| projector. |
|
|
PJ Controller 
button
3.Click the PJ Controller button to display the PJ Controller screen. First, make “Initial Setting” from the main menu. Refer to “10. How to Use PJ Control” ➔ “Initial Settings” (p.75).
4.Select Network Viewer from the Main Menu. Operation window (next page) will be displayed.
[Network Viewer]
Network Viewer
66
