Network Specifications of the Projector | Sanyo XG-705A specification

Operating Environment and Configuration

Network Specifications of the Projector

LAN Terminal

Data communication speed

100Base-TX (100Mbps)/10Base-T (10Mbps)

Protocol

TCP/IP

USB Wireless LAN Adapter

	Interface	Correspond to IEEE802.11b/g, USB 2.0/1.1

	Communication Mode	AdHoc,
	Communication Mode	Infrastructure
		Infrastructure

		1/2/5.5/11Mbps (IEEE802.11b)
	Data Transfer Speed	6/9/12/18/24/36/48/54Mbps (IEEE802.11g)
	Data Transfer Speed	When using AdHoc mode, only IEEE802.11b is
		When using AdHoc mode, only IEEE802.11b is
		usable.

	Wireless Frequency (Channel)	2412MHz–2462MHz (CH1–CH11)

		IEEE802.11g OFDM
		54/4Mbps 64QAM, 36/24Mbps 16QAM, 18/12Mbps
	Modulation Form	QRSK, 9/6Mbps BPSK
		IEEE802.11b DSSS1
		11/5Mbps CCK, 2Mbps DQPSK, 1Mbps DBPSK

	Protocol	TCP/IP

	Security	WEP 64 Bit/WEP 128Bit/WEP 152Bit, SSID, ESSID, LEAP

	Service area	about 30 m (without disturbance)
	Service area	Differs according to the operating environment.
		Differs according to the operating environment.
	Operating Voltage	DC 5V

	Environmental conditions	Operating temperature: 5–35˚C
	Environmental conditions	Storage temperature/Humidity: -10–60˚C/5–95%
		Storage temperature/Humidity: -10–60˚C/5–95%

Compliance

Countries and Standards

JAPAN: VCCI ClassB,TELEC (Wireless)

USA: FCC Part15 Subpart C (Wireless) FCC Part15 Subpart C, Class B

Canada: IC RSS-210 (Wireless), IC ICES-003 ClassB

Europe: R&TTE, EMC, LVD

7

Image 7

Sanyo XG-705A owner manual Network Specifications of the Projector, Differs according to the operating environment

Contents

Network Set-up Operation Federal Communication Commission Notice Compliance Trademarks and Copyright Safety Instructions Table of Contents Terminology Advanced SetupRestart Moderator Function Required Operating Environment for Computers Operating Environment and Configuration Differs according to the operating environment Network Specifications of the ProjectorPage About LAN Functions Chapter Flow of Image Transfer LAN Functions and the FeaturesAbout LAN Functions Image Projecting System via LAN An Example of the Connection LAN Connection Modes Operate the computer mouse with the remote control Page Setup Procedures Install the software on computers Setup ProceduresNetwork Configuration has completed Installing the Software Setup Procedures Names and Functions of the Operation Screen Network Connection Standby Display Names and Functions of the Operation Screen Parts Names and Functions of the Screen NetworkModule Client Advanced Settings NetworkModule Moderator Page Wired LAN Configurations Setting Procedure Wired LAN ConfigurationsConnecting to the LAN Line Network Environment Settings Wired LAN Configurations Confirming the Operation Wired LAN Configurations User PIN Code Wired Factory Default See the menu above DNS Domain System Blank Password User PIN Code Factory Default Setting of the Wired LANPage Wireless LAN Configurations Setting Procedures Wireless LAN ConfigurationsAttaching the USB Wireless LAN Adapter Setting the Network Environment Wireless LAN Configurations Easy Setting Wireless Factory Default Wireless InformationComputer environment and Wireless LAN connection Leap User Blank Password Wireless LAN Factory Default Settings Operation of Network Viewer Configurations with Browser Browser Environment Configurations with BrowserBrowser Configuration Introduction Starting up the Browser Information Screen of Wireless LAN Screen of Wired LAN Parameters and descriptions of Information Quick Setup One-byte characters. The name set here will be displayed on TCP / IP Password Wireless Setting Reaches in ***hours up to ASCII220 characters Mail Have entered is displayed as up to ASCII32 characters Admin Password User PIN code Figure will be displayed as . The password consists Moderator Login Password Miscellaneous Wireless LAN set menu Wired LAN set menu Change Configuration Set Restart Project the Image via the Networks Project the Image via the Networks Use the Moderator Function Moderator Function Use the Moderator Function Preparation Procedure for Using the Moderator Function Preparation for Using the Moderator Function Registration of the Moderator Setting the Moderator Function Registration of the Clients Participants Stop Projecting the Client’s Images How to Use the Moderator FunctionUnregister from Moderator Status Project the Client’s Images How to Use Network Viewer Wireless LAN AdHoc Communication Mode How to Use Network ViewerMechanism of NetworkViewer and the Flow of the Signal Wireless LAN Infrastructure Communication Mode Operation Wired LAN Communication ModeFunctional Conditions of FTP Server Which Provides Images Operating with the PJ Controller Projecting the Image Specify the FTP server to provide image data Operating with the Browser Refresh Operating with the projector Wireless LAN Set timing to switch images in Auto play mode 3-240 sec Page How to Use the PJ Controller How to Operate How to Use the PJ Controller Initial Settings Registering E-mail Address Mail Setting Enter the message to attach the E-mail Check Option items Turning on/off the projector Power & Status Check the status of the projector Input Control PC adjustment System Adjustment Image Adjustment Screen Setting Select On to automatically set the PC adjustment Confirm the actual adjustment Service Save the setting Set Select Set Number and name the settingLoading the Set Multi Control Select projector input Appendix Computer cannot connect projectors TroubleshootingWireless LAN Connection cannot be established Appendix WEP Speed of playing back images are very slow Cannot start up the browserProjector/PJ Controller cannot be turned on/off Network Viewer does not work with the projector operation Terminology Setting up the IP address with arp + pingcommand Configuring WEP security with the projector Appendix KW6AC