Manuals / Sanyo / Computer Equipment / Projector

Sanyo XG-705A owner manual Parameters and descriptions of Information

Models: XG-705A

1 99

Download 99 pages 37.47 Kb

Page 43

	6. Configurations with Browser
Parameters and descriptions of Information

Parameter	Description
Firmware Version	Show the firmware version of the projector.
Boot ROM Version	Show the boot ROM version of the projector.
Hardware Address	Show the MAC address.
IP Address	Show the IP address currently set on the projector. If DHCP is set, the
	IP address assigned from the DHCP server is displayed.
Wireless Mode*	Show the Communication standard 802.11b or 802.11b.g
Wireless Link Status*	Show the Wireless communication mode and its status of the projector.
WEP Security*	Show the WEP (Encryption) setting status of the projector.
	However, the WEP key is not shown.
Current SSID*	Show SSID set on the projector.
Current Channel*	Show the channel, through which the projector is currently
	communicating.
Data Transfer Rate*	Show the current Wireless communication speed of the projector. The
	communication speed is automatically changed by the environment at
	that time (11/5.5/2/1/54/48/36/24/18/12/9/6 Mbps). The communication
	speed cannot be fixed.
Current User/PC	Show the IP address of the computer, which is currently transferring
	images to the projector
System Time	Show the elapsed time since the power is turned on.
	The time can be reset by selecting “Reset” from the browser
	configuration screen, or by disconnecting power from the projector and
	connecting back on.
Projector	Show the name of projector. (Can be changed.)
Refresh button	Refresh the displayed data.

* Not shown at Wired LAN setting.

43

Image 43

Sanyo XG-705A owner manual Parameters and descriptions of Information

Contents

Network Set-up Operation Federal Communication Commission Notice ComplianceTrademarks and Copyright Safety InstructionsTable of Contents Terminology Advanced SetupRestart Moderator FunctionRequired Operating Environment for Computers Operating Environment and ConfigurationDiffers according to the operating environment Network Specifications of the ProjectorPage About LAN Functions ChapterFlow of Image Transfer LAN Functions and the FeaturesAbout LAN Functions Image Projecting System via LANAn Example of the Connection LAN Connection Modes Operate the computer mouse with the remote control Page Setup Procedures Install the software on computers Setup ProceduresNetwork Configuration has completed Installing the Software Setup Procedures Names and Functions of the Operation Screen Network Connection Standby Display Names and Functions of the Operation ScreenParts Names and Functions of the Screen NetworkModule ClientAdvanced Settings NetworkModule Moderator Page Wired LAN Configurations Setting Procedure Wired LAN ConfigurationsConnecting to the LAN Line Network Environment SettingsWired LAN Configurations Confirming the Operation Wired LAN Configurations User PIN Code Wired Factory Default See the menu aboveDNS Domain System Blank Password User PIN Code Factory Default Setting of the Wired LANPage Wireless LAN Configurations Setting Procedures Wireless LAN ConfigurationsAttaching the USB Wireless LAN Adapter Setting the Network EnvironmentWireless LAN Configurations Easy Setting Wireless Factory Default Wireless InformationComputer environment and Wireless LAN connection Leap User Blank Password Wireless LAN Factory Default SettingsOperation of Network Viewer Configurations with BrowserBrowser Environment Configurations with BrowserBrowser Configuration IntroductionStarting up the Browser Information Screen of Wireless LAN Screen of Wired LANParameters and descriptions of Information Quick Setup One-byte characters. The name set here will be displayed on TCP / IP Password Wireless SettingReaches in ***hours up to ASCII220 characters MailHave entered is displayed as up to ASCII32 characters Admin PasswordUser PIN code Figure will be displayed as . The password consists Moderator Login PasswordMiscellaneous Wireless LAN set menu Wired LAN set menu Change Configuration SetRestart Project the Image via the Networks Project the Image via the Networks Use the Moderator Function Moderator Function Use the Moderator FunctionPreparation Procedure for Using the Moderator Function Preparation for Using the Moderator FunctionRegistration of the Moderator Setting the Moderator FunctionRegistration of the Clients Participants Stop Projecting the Client’s Images How to Use the Moderator FunctionUnregister from Moderator Status Project the Client’s ImagesHow to Use Network Viewer Wireless LAN AdHoc Communication Mode How to Use Network ViewerMechanism of NetworkViewer and the Flow of the Signal Wireless LAN Infrastructure Communication ModeOperation Wired LAN Communication ModeFunctional Conditions of FTP Server Which Provides Images Operating with the PJ Controller Projecting the ImageSpecify the FTP server to provide image data Operating with the Browser Refresh Operating with the projector Wireless LANSet timing to switch images in Auto play mode 3-240 sec Page How to Use the PJ Controller How to Operate How to Use the PJ ControllerInitial Settings Registering E-mail Address Mail SettingEnter the message to attach the E-mail Check Option itemsTurning on/off the projector Power & StatusCheck the status of the projector Input ControlPC adjustment System Adjustment Image Adjustment Screen Setting Select On to automatically set the PC adjustment Confirm the actual adjustment ServiceSave the setting Set Select Set Number and name the settingLoading the Set Multi Control Select projector input Appendix Computer cannot connect projectors TroubleshootingWireless LAN Connection cannot be established AppendixWEP Speed of playing back images are very slow Cannot start up the browserProjector/PJ Controller cannot be turned on/off Network Viewer does not work with the projector operationTerminology Setting up the IP address with arp + pingcommand Configuring WEP security with the projector Appendix KW6AC