Aastra Telecom ATP-CNX-040-01 manual Procedures, Step, Action, Attribute, Default

Configuring the Aastra CNX

Procedures

Step	Action
13	Configure the attributes as required.
		Attribute	Default	Valid Values/Description
		Windows	DISABLE	ENABLE
		Authentication		DISABLE
				Description: Specifies whether or not to authenticate
				a user against a Windows server.
		Domain Username	None	Description: Specifies the username of a Windows
				domain administrator.
				Note: This is used once to register the Aastra CNX
				with the Windows domain.
		Domain Password	None	Description: Specifies the password of a Windows
				domain administrator.
				Note: This is used once to register the Aastra CNX
				with the Windows domain.
		Domain	None	Description: Specifies the Windows domain that the
				Aastra CNX uses. This is the default domain for users
				who do not specify a domain and for users who do not
				have accounts on the Aastra CNX.
		Primary Domain	0.0.0.0	Description: Specifies the hostname or IP address of
		Controller		the server that the Aastra CNX uses to join the
				domain.
				Note: The Primary Domain Controller (PDC) is
				considered the “master” DC on the network for a
				particular workgroup/domain.
		Password Server	0.0.0.0	Description: Specifies the hostname or IP address of
				the server that the Aastra CNX uses to authenticate
				users.
				Note: In most cases, this is also the PDC or a Backup
				Domain Controller (BDC).
		Wins Server	0.0.0.0	Description: Specifies the hostname or IP address of
				the server that the Aastra CNX uses to resolve
				Windows names.
				Note: WINS is a Microsoft Windows NT or Windows
				2000 service that dynamically registers names of
				computers on the network. In most cases, the WINS
				server is the PDC or BDC.

ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-27