Aastra Telecom ATP-CNX-040-01 manual Connect the power cable, Ground the chassis, Illustration

CNX System Administrator Guide

Connect the power cable

5

Connect the power cable

Ground the chassis

To ground the chassis:

Step Action

aLocate the 3-hole, female, power receptacle on the rear of the chassis.

bPlug the male, 3-prong connector on the power cable into the power receptacle as shown in the illustration below.

cInsert the plug at the other end of the power cable into a grounded power source (100 to 240 VAC).

Note: North America: 120 V at 15 A Europe: 240 V at 10 A

Illustration

		T1 / E1					10/100 ENET
1	2	3	4	CONSOLE	RESET	1		2

100-

1.0A

AC power cord

Connect to a grounded 15 A power source (100 to 240 VAC). (North America: 120 V at 15 A) (Europe: 240 V at 10 A)

1-8 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07