Aastra Telecom ATP-CNX-040-01 manual Configure the network settings, Step Action, continued

Models: ATP-CNX-040-01

1 190
Download 190 pages 27.62 Kb
Page 35
Image 35
Configuring Network Time Protocol (NTP)...

Aastra CNX Installation and Setup Procedures

Configure the network settings

Step Action

15Enter “y” if the date and time are correct, and press <Enter>. Enter “n” if the date and time are incorrect, and press <Enter>.

Note: If you entered “n” at the verification prompt, repeat step 14 to correct the date and time, and then enter “y” at step 15.

The following message displays (after entering “y” at the verification prompt):

Configuring Network Time Protocol (NTP)...

You can configure up to 4 NTP servers. To remove an existing server, set it's address to 0.0.0.0. If no valid servers are given then ntp will be disabled.

Do you want to continue (y/n) [n]:

16Enter “y” to continue, and press <Enter>. The following prompts display:

NTP Server #1: [pool.ntp.org]:

NTP Server #2: [pool.ntp.org]:

NTP Server #3: [pool.ntp.org]:

NTP Server #4: [pool.ntp.org]:

(continued)

ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07

1-17

Page 35
Image 35
Aastra Telecom ATP-CNX-040-01 manual Configure the network settings, Step Action, Configuring Network Time Protocol NTP