![](/images/new-backgrounds/1172943/17294351x1.webp)
Chapter 2 Switch Installation
Installing the Switch
Installing the Switch
•Rack-Mounting, page 2-4
•Wall-Mounting, page 2-15
Note If the switch is
-Sides of switch (facing up and facing down): 3.75 in. (9.52 cm)
-Port side 3.0 in. (7.62 cm)
-Power supply side: 5.25 in. (13.33 cm)
-Cover side (side not facing wall): 1.75 in. (4.44 cm)
-Base side (facing wall): 0 in. (0 cm)
Rack-Mounting
To
•Attaching Brackets for
•Attaching Brackets for
•Attaching Brackets for
•Attaching Brackets for ETSI Racks, page
•
.
Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety:
•This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
•When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack.
•If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. Statement 1006
Warning For mounting
Cisco IE 3010 Switch Hardware Installation Guide
| ||
|