2-6
Cisco IE 3010 Switch Hardware Installation Guide
78-19581-02
Chapter 2 Switch Installation
Installing the Switch
Figure 2-2 Attaching Brackets for 19-Inch Racks
Attaching Brackets for 19-Inch Racks for IP-30 Compliance (Optional)Before installing the mounting brackets, you need to install the rubber plugs in the unused mounting
holes. The rubber plugs are not supplied with the switch. You can order a kit (part number
IE-3010-IP30KIT) containing the rubber plugs.
You can order a kit (part number IE-3010-IP30KIT) that contains the rubber plugs.
Figure 2-3 shows a close-up of the rubber plug. You can install the rubber plugs in the holes as shown
in Figure 2-4 and Figure 2-5.
1Phillips flat-head screws 3Power-supply-side mounting position
2Cable-side-mounting position
Cisco CGS 2520
207231
1
1
2
3